SHURE – PGX Wireless system
Beta 58 or Lapel system
PGX Wireless Microphone Systems combine superior wireless technology, automatic set-up features and legendary Shure microphones including the SM58 and BETA58A to deliver the best sounding easiest-to-use systems in their class.
FAST AND EASY SETUP, EVEN FOR A BEGINNER
Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequency to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver.
HOW MANY MUSICIANS CAN USE THIS SYSTEM SIMULTANEOUSLY?
A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one handheld transmitter and one receiver.
IS THERE A DIFFERENCE IN SOUND QUALITY BETWEEN THIS SYSTEM AND A WIRED MICROPHONE?
The design goal of wireless microphone systems is that the user cannot differentiate between a wired or wireless mic. The PGX system uses our patented Audio Reference Companding which makes the system sound more like a wired microphone than ever before, with less noise and greater dynamic range than other wireless systems. No artifacts, lower noise floor and clearer sound at all levels.
SYSTEM TECHNICAL SPECIFICATIONS
- Compatible systems per frequency band (up to): 8
- Selectable frequencies: 90
- Auto Setup Features: Scan/Sync
- Audio Reference Companding: Yes
- Included Antennas: Attached 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 2AA, >8 h
- Environment: Small to medium stages
FURTHER TECHNICAL SPECS
PGX4 Receiver
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
327 g (11.5 oz.)
Housing
ABS
Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): –19 dBV
1/4 inch connector (into 3000 Ω load): –5 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
–105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply
PGX1 Bodypack Transmitter
Audio Input Level
–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position
Gain Adjustment Range
30 dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded polycarbonate case
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
PGX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
$45.00